FAQ

How much does the Amero kit cost?

We sell worldwide from our web site. So far we have sold our 22″ products in 28 countries and every state in the USA. As each country has a different currency prices often vary so its easier if you just contact us direct and say what country you are from then we can work out a price for you.

Some examples are an Amero kit in the UK is £500.00 or for countries in Europe it is 650 Euros with free shipping.

Our prices will remain the same as similar spec products from 20″ brands as advertised in bike stores in those counties.

We do offer free world wide shipping on our Amero kits. For smaller orders such as wheels or tyres we only charge 25% of the shipping cost.

Shipping times from UK to USA for example normally takes 3 to 5 working days. Or UK to Australia, NZ, South Africa or Japan is 5 to 7 days. In 10 years of shipping orders out we’ve never had a parcel not arrive. We only accept payment via Paypal.

What is the geometry of the Amero frame?

We designed our Amero frame and forks as a Trails, dirt jumping frame that you could also ride in Street, Park or Vert. So with Trails as it’s primary use our frame geometry reflects that.

Top Tube: 21.5″

Chain Stay: 14.25″

Head Tube angle: 74.5 degrees

Seat Tube angle: 71 degrees

BB height: 12.5″

Stand over height: 9″

Fork rake: 33mm

Wheel Base: 37.75″

Here is why we went with those numbers.

Our Amero frame top tube is 21.5″ long. This has proven long enough for riders who are 6.5ft tall with size 15 shoe size to still do bar spins, X,ups or turn downs on no problem. Yet still short enough for double tail whip 360 jumps or 720 jumps (all those moves we have already documented on film on our Amero). In other words the top tube doesn’t need to be any longer or shorter than that.

Chain stay rear end length is 14.25″ from centre of BB to the centre of the rear drop out. We made 8 generations of frame prototypes each with different geometry to test ride. We found that 14″ and shorter rear ends consistently looped out on landings at the trails where as 14.5″ felt too long. 14.25″ was the perfect “sweet spot” as it looked, felt and rode the best.

Head Tube angle is 74.5 because you don’t need a steeper head angle for trails and you don’t need a mellower head angle as 22″ wheels provide the extra stability anyway. Please note: If you had a 73 degree head angle frame then decide to run say a 2.4 size front and 2.0 tyre rear you will lose half a degree or more from your head angle. Possibly giving you a 72.5 or 72 degree head angle. No brand would ever market a bike with a 72 degree head angle as it would just be too unresponsive. So with 74.5 degrees its bang on perfect to begin with or even if you do run different size tyres back and front you still would have a 74 or 73.5 degree head angle.

BB height: Our prototypes also had higher and lower BB heights and we found that 12.5″ was the perfect sweet spot, low enough for easy manuals but high enough to help you easily spin the bike in the air.

The seat tube angle is 71 degrees and standover height is 9″ .

We were the first to develop this combination of frame geometry for 22″ bikes back in 2011 and so far the Amero has never lost a comparison test with any other type of 22″bike. It handles better than other 22″ bikes because it’s lighter, faster and has proven to have the most agile geometry.

Use the Contact form on the homepage if you want the full frame spec.

Can I race a twenty2 in 20inch and cruiser class?

Yes, you can race a 22″ wheel bike in 20″ and 24″ by just changing the tyres. The rules say that for the 20″ class you need to have a tyre diameter under 22.5″ tall and to race in the 24″ class you have to have a wheel over 22.5″ tall.

You can use our 22″ F22 tyres to race in the 24″ class as they are just under 22.5″ tall at 60psi or they can expand to 22.75″ tall at 75 to 80 psi. They won’t expand any taller than that even at 100psi. So that means they are legal in either class if you want.

When I raced in 20″ class I have also used the 2.10″ x 22″ Megnah street / park tyres.  They are fine at 60 psi but I would not advise going above 65 psi with them. The 22″ Megnah tyre are not a 100 psi tyre (as stated on the sidewall) so just regard them as a 60 psi tyre which is fine for racing. We do hold some stock of the Megnah tyres but we had nothing to do with designing or manufacturing them and I would only recommend them for use as a race tyre.

I won races in both the 20″ and 24″classes on our 22″ Amero bike and it did equally well in either class.

Contact

Your Name

Your Email (if you'd like a reply)

What country are you in?

Your Message

Select your currency
EUR Euro